New QuickPwn for 2.0.2 [Windows] out PLUS WinPwn news!

[flrdotcom]

Originally Posted by bpwalker74

Where can I get the 2.0.2 firmware for 2g. I tried the downloads section one and can't seem to download it.

here iClarified - iPhone - Where To Download iPhone Firmware Files From

[shaybaba]

people please help out
i am a bit lost on all the info over the web and i couldn't find a normal guide with all the correct info using the quickpwngui120

i have 2g phone running 1.1.4 activated and unlocked
in order to use quickpwngui120 do i need to do the flowing: ?

1.restore or upgrade to 2.0.2 in itunes ?
2.download the ipsw of 2.0.2 ?
3.use the new version of quickpwn to activate it ?
4. will after that do i need to unlock my phone again ? like using bootneuter from cydia ? or will it remain unlocked ?
5. anything else i am forgetting ?


please help out with some sort of full guide what is the correct way to do it

tnx

[elnekis]

Originally Posted by shaybaba

people please help out
i am a bit lost on all the info over the web and i couldn't find a normal guide with all the correct info using the quickpwngui120

i have 2g phone running 1.1.4 activated and unlocked
in order to use quickpwngui120 do i need to do the flowing: ?

1.restore or upgrade to 2.0.2 in itunes ?
2.download the ipsw of 2.0.2 ?
3.use the new version of quickpwn to activate it ?
4. will after that do i need to unlock my phone again ? like using bootneuter from cydia ? or will it remain unlocked ?
5. anything else i am forgetting ?


please help out with some sort of full guide what is the correct way to do it

tnx

- Download the 2.0.2 file
- Shift + Upgrade button in iTunes with the file
- Use the new Quickpwn and follow the steps to activate and jailbreak. Do not select the option to unlock.

bye!

[bxbrova718]

Question::: For Those who have the iphone 2g and has performed the 2.0,.2 method. Do you guys see any difference in the reception...I know it was mainly for the 3g purpose, but im just trynna get feed back if this was an advantage for the reception of 2g phones

[breitlinglvr]

So 2G guys will be OK using quickpwn for currently unlocked phones? We just follow the steps you provided and bingo still unlocked and jailbroken?

[KoNeko]

Now, I know this QuickPwn program doesn't support direct upgrading from inside the program (or ipsw creation, rather). But does anyone know if the upcoming PwnageTool is going to support upgrading without restoring? I think I remember reading that it would somewhere, my main reason in asking is because I don't want to have to reinstall my Jailbreak apps again and setup all my Customize stuff from scratch.

And another question, if I do wait until the new PwnageTool is released and decide to make a custom ipsw with NO baseband update, are the supposed "reception fixes" going to take any effect on my iPhone 3G? Or would the baseband have to be updated to get those so called fixes?

Thanks,
KoNeko

[RealRitzcracker]

3G user here and quickpwn works fine.
I used the 2.0.1 trick and now this new version.
Both work totally safe.

[alucardunit1]

so this will unlock the version 2.0.2?

[LaZARuZ]

read the first post everything is there.

[stlcaddie]

Originally Posted by jaredb03

2.0.2 seems more glitchy to me than 2.0.1, and 2.0.1 sucked also.

Same here, but what i noticed is both FW's 2.0.1 and 2.0.2 ran fast and smooth like there supposed to. But as soon as i jailbroke and added apps thats when my phone slowed down and texting got slower and apps open slower. So a fresh iphone runs fast and smooth and an iphone with lots of apps whether jailbroke or not runs like a 20g dell laptop, like the one im typing on now. So what i'm saying is, It's going to happen no matter what apple does.

[alucardunit1]

ok i am just making sure so my 2.0 unlocked fone will be good to go

[RealRitzcracker]

This wont brick your 3G.
But if you want to unlock your 3G phone in the future then don't update because the 2.0.2 update includes a baseband update for the 3G iPhone.
QuickPWN works fine with 3G.

[Muggz5]

Originally Posted by stupiduser

iTunes don't allow to update or restore my jailbroke 2.0.1 1st gen iphone to 2.0.2 firmware.

error keep prompt.

Yeah I had the same issue, so I put my phone in DFU and shift + restore to the 2.0.2 (OEM) I downloaded from BigBoss. its just finishing the software restore now.

edit: verifying, and now finishing....
Quickpwn Edit: I am running on 2.0.2 jailbroken, and unlocked. Great job Dev Team that was quick and painless. Now for a backup restore in itunes.

Vista Home, QuickPwn GUI, (2) 8GB 1st Gen. iPhones, Downloaded OEM 2.0.1 and 2.0.2
Used 2.0.1 to set up quickpwn to pwn 2.0.2 everything is great, I am seeing a big big change in how smooth the phone operates now. Full bars as usual. EDGE seems a bit faster.(TMobile)

Note: What I posted above regarding how the phone runs is after getting it all set up with all 3rd party apps. etc everything back to normal.

[stereo313]

where does itunes put the firmware now it used to go in my owner file.its not there.

[jaredb03]

Originally Posted by stereo313

where does itunes put the firmware now it used to go in my owner file.its not there.

C:\Documents and Settings\UserName\Application Data\Apple Computer\iTunes

If you can't find it just do a search for 2.0.2 and it will find it.

Originally Posted by stlcaddie

Same here, but what i noticed is both FW's 2.0.1 and 2.0.2 ran fast and smooth like there supposed to. But as soon as i jailbroke and added apps thats when my phone slowed down and texting got slower and apps open slower. So a fresh iphone runs fast and smooth and an iphone with lots of apps whether jailbroke or not runs like a 20g dell laptop, like the one im typing on now. So what i'm saying is, It's going to happen no matter what apple does.

1.1.4 was never slow no matter what was installed on it. apple just doesn't care if there customers aren't happy anymore. Not that they ever did.